Be prepared for surveillance with our STEDI-EYE® active-image stabilized binoculars. A simple change of the eyepiece provides night vision capability for advanced optical performance.
Stabilized Optics
Sights & Scopes
Other Products
Accessories
Observer
The STEDI-EYE® Observer is a 14x stabilized binocular that has the same endurance and durability of the military M25 without internal eye protection or reticle.
Show/Hide more...
FRASER-VOLPE pioneered the development of active image
stabilized binoculars. For OVER 38 YEARS our products
have set the standard for high-quality optical
instruments used in demanding field conditions.
The STEDI-EYE® Observer is manufactured to
stringent U.S.& Foreign Military standards. Law
enforcement personnel now have the option
of binoculars with the same endurance and
durability of our rugged military model. The
STEDI-EYE® Observer offers the unequalled
performance and uncompromising quality of
all Fraser-Volpe products,as well as night
vision capabilities as simple as changing the
eyepieces. There is simply no better value in
the field of gyro-stabilized binoculars.
The most sophisticated hand-held
binoculars ever engineered.
With NIGHT VISION Capability!
The STEDI-EYE® Aviator is a 10x stabilized binocular, optimized for use with low flying aircraft. Its full-face eyecup allows for comfortable viewing over extended missions.
Show/Hide more...
The STEDI-EYE® Aviator is manufactured to stringent U.S. and Foreign Military standards. This rugged model provides a simplified mode of operation specifically designed for long-term surveillance from high-speed moving platforms such as aircraft, vehicles and boats. There is simply no better value in the field of gyro-stabilized binoculars. FRASER-VOLPE pioneered the development of active image stabilized binoculars. For OVER 38 YEARS our products have set the standard for high-quality optical instruments used in demanding field conditions.
The STEDI-EYE® Navigator is a 14x stabilized binocular designed for long term surveillance from high speed moving platforms such as a ship or vehicle.
Show/Hide more...
The STEDI-EYE® Navigator is manufactured to stringent U.S. and Foreign Military standards. This rugged model provides a simplified mode of operation specifically designed for long-term surveillance from high-speed moving platforms such as aircraft, vehicles and boats. There is simply no better value in the field of gyro-stabilized binoculars. FRASER-VOLPE pioneered the development of active image stabilized binoculars. For OVER 38 YEARS our products have set the standard for high-quality optical instruments used in demanding field conditions.
The STEDI-EYE® PM25 is a 14x stabilized binocular that is very similar to the military M25 except with external eye protection. ITAR restricted.
Show/Hide more...
The STEDI-EYE® PM25 draws it's design legacy from the M25 and is intended for use in the international marketplace by civil guard groups, security forces and tactical units such as SWAT and Special Operations.
Primarily used for long range visual target recognition, continuing surveillance and ranging, the PM25 is ideal for visual surveillance needs associated with Homeland Security, civil crime intervention and defense operations. As with all STEDI-EYE® binocular models, the PM25 incorporates interchangeable eyepieces which can be readily replaced in the field with "Night Eyes" eyepieces to provide night vision capability. Using the PM25 with the optional Eye-Link® system provides the means for field agents to simultaneously view, record and/or transmit real time video of people and events under surveillance. The PM25 is a rugged visual surveillance "force multiplier", providing mission critical support to the field observer. FRASER-VOLPE pioneered the developement of active image stabilized binoculars. For OVER 38 YEARS our products have set the standard for high-quality optical instruments used in demanding field conditions.
The STEDI-EYE® Mariner is a 14x stabilized binocular that is taylored for the boating and fishing industries. It's yellow cover is easily indentifiable and its buoyant.
Show/Hide more...
The STEDI-EYE® Mariner
The most sophisticated hand-held binoculars ever engineered. With NIGHT VISION Capability! Stabilized viewing on the water is essential,so why not use a product from the pioneer of Gyro Stabilization - FRASER-VOLPE. For over 38 years, Fraser-Volpe has provided high quality optics to all branches of the United States Military. Fraser-Volpe now brings this quality to the Marine Industry. The problem with most stabilized binoculars on the market is that they are fragile and break easily. The STEDI-EYE® Mariner is a direct descendant of Fraser-Volpe's M25 Military model that has consistently received high praise for enduring grueling field use. Expect nothing less than an exceptional piece of equipment. Choose Fraser-Volpe! Fraser-Volpe pioneered the development of active image stabilized binoculars. For OVER 38 YEARS our products have set the standard for high-quality optical instruments in demanding field conditions.
Under development - available 2010. The STEDI-EYE® Monolite is a 14x stabilized day monocular that is built to the same military-grade quality as our other products, but in a stylistic 2.0 lbs package. A commercial or military version is available.
Under development - available 2010.
The STEDI-EYE® Bylite is a 14x stabilized day binocular that is built to the same military-grade quality as our other products, but in a stylistic 3.0 lbs package. A commercial or military version is available.
The MARS is an integrated red dot reflex sight and laser pointer (visible or IR) in one light weight, small package. It's rugged construction makes it the ideal sight for any picatinny-railed weapon. A visible and IR version is available. ITAR restricted.
Show/Hide more...
The MARS (Multi-Purpose Aiming Reflex Sight) combines the advantages of a quick-reaction red-dot sight with a user-controlled aiming laser. MARS is used by first responders and the U.S. military around the world and is now produced by Fraser-Volpe LLC, in the USA.
The Boresight Kit provides accurate alignment for a sight or scope on a small caliber weapon (up to .50 caliber) through a 5x telescope. ITAR restricted.
Show/Hide more...
NV Eyepieces
The NV Eyepieces are attachable eyepieces with a built-in image intensifier tube allowing the user to see into the night from Fraser-Volpe's long-range binoculars. The type of tube must be selected. Note: Some tubes are ITAR restricted.
Show/Hide more...
Night Vision eyepieces are compatible only with Fraser-Volpe binoculars Gen II or Gen III image intensifiers available in 12X. Creates the ultimate stabilized, hand-held night vision device. Provides the greatest magnification of any night vision device in its class.
The Stedi-Eye Cam is an attachable eyepiece with a built-in 512 x 492 pixel video camera allowing the user to grab video images from Fraser-Volpe's long-range binoculars. The NTSC data can then be recorded or transmitted (not included).
Show/Hide more...
The Stedi-Eye Cam is an attachable eyepiece compatible with our FV binoculars (excluding Bylite). By replacing either eyepiece with the Stedi-Eye Cam, our gyro stabilized binoculars with 14X magnification can be used as a long range CCD camera with video output. The operator can continue viewing through the other ocular channel while recording the scene or transmitting NTSC data.
The Dioptometer is a precision instrument that is used to calibrate or measure the diopter setting of another optical device.
Show/Hide more...
The Dioptometer is a precision instrument used to accurately determine the diopter zero setting of another instrument. The focusing sleeve of the dioptometer allows ± 1 diopter objective offset in ¼ diopter units. The eyepiece allows ± 4 diopter accommodation to user’s eye.
The internal reticle defines the image plane at “zero” diopter position of objective sleeve when viewing a collimated image. The Dioptometer eyepiece allows independent focus on the image plane, thus accommodating the user’s eye. The Dioptometer, so set, provides a “zero” diopter standard with which to establish another instrument’s zero diopter alignment. Errors in “zero” setting are easily checked using offset sleeve, graduated in ¼ diopter markings.
Characteristics:
Magnification
4.7x
Field of View
12°
Diameter of Exit Pupil
.185
EFL of Objective
4.123
EFL of Eyepiece
.865
Length
7 inches
Hand Cuff Keys
These Hand Cuff Keys are universal keys that work on any official hand cuffs.
Soft Pouch
The Soft Pouch is a nylon container to hold the binocular. The color is black. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-122.
Show/Hide more...
Carrying Case
The Carrying Case is a hard impact-rersistent container to hold the binocular while in the soft pouch or out of the pouch. The color is black. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-501-2.
Show/Hide more...
Cleaning Kit
The Cleaning Kit is composed of lens cleaning fluid, lens tissue, a hand duster, and a dust cloth. It is used with all optical devices. Part Number: DL44048.
Show/Hide more...
Baker Full-Face Eyecup
The Baker Full-Face Eyecup is a binocular two-eye rubber cup used for greater comfortable viewing over extended times. It is standard on the Aviator. Mates over any binocular. Part Number: 01065-118.
Show/Hide more...
Objective Covers
The Objective Cover is a rubber dust cover used on binocular Objective lens (front). It attaches to the binocular's objective housing. Mates with the Aviator, Mariner, Observer, Navigator, and PM25. Part Number: 93143-141.
Show/Hide more...
Eyepiece Covers
The Eyepiece Cover is a rubber dust cover used on binocular eyepieces. It attaches to the Neck Strap. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-143, 03203-646 (SPOTTR).
Show/Hide more...
Eyepiece 10x
Different eyepieces can mount to Fraser-Volpe binoculars. Most binoculars are 14x (except the Aviator which is 10x). Mates with the Aviator, Mariner, Observer, Navigator, and PM25. Part Number: 96016-600 (10x), 96016-400 (12x). Military units are not interchangeable.
Show/Hide more...
Eyepiece 12x
Different eyepieces can mount to Fraser-Volpe binoculars. Most binoculars are 14x (except the Aviator which is 10x). Mates with the Aviator, Mariner, Observer, Navigator, and PM25. Part Number: 96016-600 (10x), 96016-400 (12x). Military units are not interchangeable.
Show/Hide more...
Arctic Battery Pack
The Arctic Battery Pack is auxilliary power source for binoculars. It attaches to the belt of the user and plugs into the binocular to provide extended operational time even in extremely cold weather conditions. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-123-3. Note: Requires 93143-126 Coil Cord.
Show/Hide more...
Eyecup (Day)
The Eyecup is a rubber cup used on binocular eyepieces. It accommodates direct use and use with eye glasses. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 84025-199.
Show/Hide more...
Eyecup (NV)
The Eyecup is a rubber cup with a side shield used on binocular eyepieces particularly for night equipment use. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-169.
Show/Hide more...
Hand Strap
The Hand Strap is a nylon strap with a leather comfort band used on binoculars for secure gripping. Mates with the Aviator, Mariner, Observer, Navigator, and PM25. Part Number: 93143-124.
Show/Hide more...
Neck Strap
The Neck Strap is a nylon strap with a leather center comfort band used on binoculars for hanging around the neck. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-125.
Show/Hide more...
Battery Door
The Battery Door is a binocular replacement part.Mates with the Aviator, Mariner, Observer, Navigator, and PM25. Part Number: 93143-127.
Show/Hide more...
Battery Door O-ring
The Battery Door O-ring is a binocular replacement part. Mates with the Aviator, Mariner, Observer, Navigator, and PM25. Part Number: 93143-127-1.
Camera Adapter Ring
The Camera Adapter Ring allows an SLR camera to be attached to the binocular. A 52mm thread is provided. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-220.
External Power Cable
The External Power Cable provides the capability to power the binocular from an external source. The cable mates to a cigarette lighter and can handle input voltages from 6 to 30 VDC.Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number:01065-134.
Show/Hide more...
Filter Adapter
The Filter Adapter screws on to existing binoculars allowing various 49 mm threaded filters to be installed. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 93143-221.
Show/Hide more...
Polarizing Filter
The Polarizing Filter is a screw-on filter (49 mm threads) that eliminates glare from light sources such as the sun. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 49MM Polarizing. Note: Must be used with the Filter Adapter.
Show/Hide more...
Haze Filter
The Haze Filter is a screw-on yellow filter (49 mm threads) that enhances the view through and haze and fog. Mates with the Aviator, Mariner, Observer, Navigator and PM25. Part Number: 49MM Yellow. Note: Must be used with the Filter Adapter.
Show/Hide more...
Notch Filter
The Notch Filter is a screw-on 1064 nm Notch filter (49 mm threads) that blocks only 1064 nm. Mates with the Aviator, Mariner, Observer, Navigator, and PM25. Part Number: 01065-408. Note: Must be used with the Filter Adapter.
Operator’s Manual
The Operator's Manual provides instructions to use and maintain your Fraser-Volpe products. Part Number: 01065-2010 (Aviator), 01065-1010 (Mariner), 01065-805 (Navigator), 01065-290 (Observer), 01065-291 (Observer with Modified Switch), 93143-150 (PM25), 05004-510 (Stedi-Eye CAM), 08002-010 (MARS)